Low-Pressure Multi-Way Cocks
Technical specifications
| Bore Size | 0.197" (5 mm) |
| Brass, carbon steel or stainless steel valve bodies are forged. All other components are made from barstock material. | |
| Certification | acc. to EN 10204 2.1, 2.2, 3.1 and 3.2! |
| Manifolds for Sour Gas Service are available in accordance with NACE MR0175/ MR0103 and ISO 15156. | |
| For all Manifolds and Multi-Way Cocks we are offering a range of Mounting Kits. | |
| Surface treatment of carbon steel components | Phosphatized, Zinc Plated surface optional |
| Surface treatment of carbon steel accessories | Zinc Plated |
| Manifolds and Multi-Way Cocks cleaned and lubricated for Oxygen Service. Accessory Kits cleaned and degreased. Suffix used F0 and F5. | |
| Manifolds for Fugitive Emission Applications. |
Technical documentation
Benefits
- The standard inlet and test connections are G 3/8 female threaded. The multi-way cocks are often supplied with bulkhead connectors at the inlet, the test connections are plugged with a pipe plug. For a perfect installation of the multi-way cocks it is ideal to use the bulkhead connector tube fittings which fit to the mounting bracket (see Mounting Accessories).
- Just quarter turn operations are sufficient to switch from one position to the next one – operating errors are therefore minimized. The multi-way cocks are operated by a mounted handle.
- Every standard Manifold or Multi-Way Cock is factory tested hydrostatically to a requirement of no visible leakage.
Applications
- AS-Schneider Low-Pressure Multi-Way Cocks are designed, manufactured and tested with respect to the relevant standards applicable in this field. The multi-way cocks are for direct mounting according to DIN EN 61518 (IEC 61518)
Engineering services
Free engineering services:
- Support for the calculation, selection and configuration of DBB valves, instrumentation valves, and manifolds
- Parts selection support for installed AS-Schneider products
- Assistance in finding of proper solutions for each application
- Provision of technical documentation for the operation and maintenance of AS-Schneider products
Logistic services:
- Standard delivery "to the door", as well as the possibility of shipment of goods directly from the Factory on the terms of FCA Incoterms 2020
- Support in customs clearance of goods shipped on FCA terms, including the provision of certificates of conformity, as well as letters on the absence of the need for mandatory certification for certain groups of goods