MODEL 8392B
Technical specifications
| Size | 2” (DN 50) through 12” (DN 300) |
| Material | All stainless steel construction in flame area |
| Enclosure |
Nema 4, Weatherproof |
| Pressure Switch |
Explosion Proof: 4 - 20 InWC |
| Pilot Fuel | Natural Gas — 4 InWC to 10 psig Supply Pressure LPG — 1 psig to 10 psig Supply PressureDigester Gas 4 InWC to 10 psig Supply Pressure Pilot Consumption: 22-150 SCFH |
| Electrical | 115V, 1PH, 60 Hz, 10 AMP, grounded neutral contacts for remote monitoring NO, 3 AMP, “Flame On” NO, 3 AMP, “Flame Failure” |
Technical documentation
Benefits
- Automatic ignition and re-ignition
- Pilot ignition system at ground level
- Stoichiometric pilot on all burners
- Efficient combustion with biogas BTU value as low as 400 Icu. Ft.
- Pilot System operates with gas pressures as low as 4 inWC
- Safely incinerates waste gases preventing fugitive VOC emissions
- Reliable pilot gas ignition system ensures that the waste gas is properly incinerated
Applications
- The Groth Models 8391B & 8392B Waste Gas Burner includes an ignition system with industry leading features. The burner wind shield contains the unique “downdraft prevention” with a bevel design which virtually eliminates the possibility of the flame being blown out. The design also provides the proper air/fuel mixture to ensure an efficient burn. The wind shield will deflect outside winds, up to 150 MPH, and operates efficiently in heavy rains preventing smoke and odors from permeating the surrounding area. The Groth Model 8392B Waste Gas Burner features flame front ignition technology allowing pilot ignition from the ground. The “flame front” is contained within pilot ignition piping which is plumbed to the wind shield to ignite the gas stream. The technology built in to the 8392B makes this among the most efficient, durable, and easy to maintain waste gas burners available.
Engineering services
Free engineering services:
- Support for the calculation, selection and configuration of safety, breathing valves and flame arresters Groth
- Parts selection support for installed Groth relief valves, breathers and flame arresters
- Assistance in finding options for safety valves, breathing valves and Groth flame arresters;
- Provision of technical documentation for the operation and maintenance of Groth breathing valves and flame arresters.
Logistic services:
- Standard delivery "to the door", as well as the possibility of shipment of goods directly from the Factory in Europe/USA on the terms of FCA Incoterms 2020
- Support in customs clearance of goods shipped on FCA terms, including the provision of certificates of conformity, as well as letters on the absence of the need for mandatory certification for certain groups of goods